MultiFRAD 3000-Series User Guide

Point to Point Setup

The Point to Point Setup dialog box controls the WAN port protocol, dial on demand, and remote port setup. The WAN port protocol can be either Point to Point Protocol (PPP) or Serial Line Internet Protocol (SLIP). PPP is the more robust of the two protocols in that it allows the end-points to negotiate use of the link and protocol parameters in a standardized way and also allows for standardized encapsulation of the packets. SLIP is an older protocol and requires manual authentication using a script.

In order to display the PPP dialog box, the WAN Port Setup dialog box has to be configured for PPP/ SLIP.

PPPis the default protocol. If SLIP is being used, click on the PPP Enable option to disable PPP. Click on the SLIP Enable option. Determine if the TCP header is going to be compressed using VJC compression. If VJC compression is used, click on the CSLIP (Van Jacobson Compression) option.

46

Page 46
Image 46
Multitech FR3060, 3100 manual Point to Point Setup