Chapter 5 - Remote Configuration
In the Dial String field, enter the AT command for dialing (ATDT) plus the phone number of the remote MultiFRAD.
If your Modem Initialization String, Initialization Response, or Connect Response values are different than the defaults in the dialog box, refer to your modem user documentation and change the default values to match your modem.
Click on OK when you are satisfied with your selections.
6You are returned to the Windows program. Start the MultiFRAD Configuration program. Windows 3.1x: Double click on the MultiFRAD Configuration icon in the Program Manager. Windows 95: Click on Start >> Programs >> MultiFRAD 3000 >> MultiFRAD Configuration.
7The Dialing Router Dialog Box is displayed while software is dialing the remote MultiFRAD.
8The Reading Setup Dialog Box is displayed.
9The MultiFRAD Setup dialog box is displayed. This is the dialog box of the remote MultiFRAD. Refer to Chapter 4 for a description of each dialog box. For a detailed description of each field within a dialog box, refer to the
10After you have changed the configuration of the remote MultiFRAD, click on the Download Setup button to update the configuration. The remote MultiFRAD will be brought down, the new configuration written to the unit, and the unit will reboot.
11Click on the Exit button when the downloading is complete.
12The Hangup connection with Router? dialog box is displayed
Click on the Yes button to disconnect the phone connection to the remote site.
13If the same telephone number is not going to be used again in the immediate future, you may want to remove it from the Port Setup dialog box.
14At the remote site, reconnect the MultiFRAD to the serial port of the PC and from the Program Manager screen click on the MultiFRAD Configuration Icon to verify that the MultiFRAD is running.
55
