
MultiFRAD 3000-Series User Guide
Introduction
A typical Telnet client application, and typical
For a detailed description of the MultiFRAD software, refer to Chapter 4 in this User Guide. For a detailed description of each parameter, refer to the
The TCP/IP stack has to be loaded before the Telnet client can run and the Telnet Server option in the MultiFRAD software has to be enabled. To access the Telnet Client, double click on the Telnet icon. A blank Telnet screen is displayed. Click on Connect and then Remote System.
When the Connect to remote host dialog box is displayed, a Host Name has to be entered. In this example, the IP Host Name is 200.2.9.1.
Enter you MultiFRAD IP Address in the Host Name field. Click on the Connect button and the MultiFRAD Telnet Server dialog box is displayed.
MultiFRAD Telnet Server Menu
The MultiFRAD management menu provides two options; MultiFRAD Configuration and Remote User Database. The MultiFRAD Configuration options allow you to select the protocol stack, high or low level device drivers, applications, Mux data ports, filtering, priority, or system information. The Remote User Database option allows you to build and maintain a user database for remote access.
When you enter a password in the Applications Setup dialog box in the MultiFRAD Software, once you choose an option from the MultiFRAD Telnet Server dialog box, you must enter your password before your choice is accepted.
60