Chapter 2 - Installation
Cabling your MultiFRAD 3000
Cabling your MultiFRAD involves making the proper Power, Command Port, Ethernet, and Channel connections. Figure 3 shows the back panel connectors and the associated cable connections. The MF3060 supports up to 6 data channels and the MF3100 supports up to 10 data channels. The MF 3060 cannot be upgraded to support 10 channels. Table 1 details the procedures for connecting the cables to your MultiFRAD.
PC or Terminal Units
VOICE/ |
| VOICE/ |
|
|
| VOICE/ |
|
| VOICE/ |
|
|
|
|
FAX |
| FAX |
|
|
| FAX |
|
| FAX |
|
|
|
|
CHANNEL |
| CHANNEL |
|
|
| CHANNEL |
|
| CHANNEL |
|
|
|
|
8 |
| 7 |
|
|
| 6 |
|
| 5 |
|
| INTERNAL |
|
E&M | FXO | FXS | E&M | FXO | FXS | E&M | FXO | FXS | E&M | FXO | FXS | COMPOSITE |
|
LINK | MONITOR | ||||||||||||
VOICE/ |
| VOICE/ |
|
|
| VOICE/ |
|
| VOICE/ |
|
|
| XMT RCV |
FAX |
| FAX |
|
|
| FAX |
|
| FAX |
|
|
|
|
CHANNEL |
| CHANNEL |
|
|
| CHANNEL |
|
| CHANNEL |
|
|
|
|
4 |
| 3 |
|
|
| 2 |
|
| 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| T1 DSU |
|
|
|
|
|
|
|
|
|
|
|
|
| GND |
CHANNEL | 10 | CHANNEL | 8 | CHANNEL | 6 | CHANNEL | 4 | CHANNEL | 2 (RS232/V.35) | 10BASET | COMMAND PORT | I |
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
| EXT. COMPOSITE LINK (RS232/V.35) | POWER |
CHANNEL | 9 | CHANNEL | 7 | CHANNEL | 5 | CHANNEL | 3 | CHANNEL | 1 (RS232/V.35) | ETHERNET | O |
Power Connection
Channel Connections
Command Port Connection
AS400 TM
T1 CSU/DSU or Comparable
Link Device
Statistical Multiplexers
Ethernet Connection
Figure 3. Cable Connections
Table 1. Cabling Procedure
Step Procedure
1Connect one end of an
NOTE: only Channels 1 and 2 support the RS232/V.35 protocol, and all channels support either asynchronous or HDLC synchronous RS232 data equipment such as multiplexers.
2Connect one end of an
3If you have a LAN, make the network connection by connecting a
15
