N-Tron 102PC-SE user manual Troubleshooting, Support FCC Statement

TROUBLESHOOTING

1.Make sure the (Power LED) is ON.

2.Make sure you are supplying sufficient current for the version chosen. Note: The Inrush current will exceed the steady state current by ~ 2X.

3.Verify that Link LED’s are ON for connected ports.

4.Verify cabling used between stations.

5.Verify that cabling is Category 5E or greater for 100Mbit Operation.

6.Verify that a null-modem cable is being used to connect other DCE devices to the serial port, or that a straight through cable is being used to connect a PC to the serial port.

SUPPORT

Contact N-Tron Corp. at: TEL: 251-342-2164 FAX: 251-342-6353 www.n-tron.com support@n-tron.com

FCC STATEMENT

This product complies with Part 15 of the FCC-A Rules.

Operation is subject to the following conditions:

(1)This device may not cause harmful Interference

(2)This device must accept any interference received, including interference that may cause undesired operation.

12/1/2006 13