N-Tron 102PC-SE user manual Recv-mail Configure incoming mail options

o	recv-mail		(Configure incoming mail options)
	￿	leave-on-server		(enable or disable to leave messages on the server)
	￿	mailbox-name		(set the mailbox’s name)
	￿	mailbox-password		(set the mailbox’s password)
	￿	server-name		(set the server’s name)
	￿	server-port		(set the server’s port number)
o	send-mail		(Configure outgoing mail options)

￿smtp-server-name

￿smtp-server-port

￿host-name

￿from-address

￿from-address-identity

￿to-address

￿cc-address

￿reply-to-address

￿subject

(set the smtp server name)

(set the smtp server port number) (set the host name)

(set the mail ID for the from address, ex. info@n-tron.com) (string associated with the mail ID, ex. N-Tron)

(set the to mail address field) (set the cc mail address field) (set the mail ID reply to address) (set the subject field of the message)

o serial	(Configure the serial settings for the serial port s0)
￿	auto-dialin	(enable or disable auto-dialin)
￿	escape-monitor	(enable or disable escape monitor)
￿	escape-string	(set the escape string, default ‘+++inet’)
￿	s0	(configuration options for serial port s0)

	∙	auto-dialin		(configure auto dialin settings)
		o	enable/disable		(enable or disable auto-dialin)
		o	message		(enable or disable auto-dialin message)
	∙	o	trig-mode		(char, dtr, dtr-char, or none trig mode options)
		auto-dialin-ipaddress		(set an IP address for the auto-dialin feature)
	∙	auto-dialin-port		(set the port number for the auto-dialin feature)
	∙	auto-dialin-protocol		(telnet)
	∙	auto-dialout		(enable or disable auto dialout)
	∙	auto-dialout-port		(set the port number for the auto-dialout feature)
	∙	auto-dialout-protocol		(telnet)
	∙	baud-rate		(Possible baud-rate value(s) are 300 600 1200 1800 2400 4800 9600 19200 38400 57600
				115200 230400)
	∙	buffer-datasize		(Buffer data-size range: [1-1500] bytes)
	∙	buffer-time		(set a buffer time in seconds, 0 for no buffer)
	∙	chat-script		(Chat-script is used to establish physical link from the dialing to answering end in case of
				modem connect, when modem dialing-method is set to chat-script.)
	∙	connect-state		(answering or dialing state)
	∙	connect-type		(direct or modem connect type)
	∙	data-bits		(set the number of data-bits over the serial line, default is 8 bits)
	∙	dialout-monitor		(set the dialout monitor to dtr or none)
	∙	echo-command		(enable or disable the echo command)
	∙	flow-control		(rts-cts or none)
	∙	host-interaction-mode		(enable or disable host interaction mode)
	∙	login-string		(string up to 8 characters)
	∙	modem		(modem configuration)
		o	connect-string		(set the connect string for a modem)
		o	dial-number		(set the number to dial)
		o	dial-prefix		(any prefix dialing needed can be set here)
		o	dial-suffix		(any suffix dialing needed can be set here)
		o	dialing-method		(use configuration of chat-script)
		o	hangup-string		(set string used to hang up the line)
		o	init-string		(set init number [1-5])
		o	ok-string		(set an ok string)
	∙	o	ring-string		(set a ring string)
		parity		(none, odd, or even parity)
	∙	raw-dialin		(enable or disable raw-dialin)
	∙	raw-dialout		(enable or disable raw-dialout)
	∙	stop-bits		(set the number of stop bits [1, 1.5, or 2])
o	time	(Set system time HH:MM:SS)
o	watchdog	(Enable or disable watchdog)

(continued…)

12/1/2006 15