NAD C 525BEE Delete, Installing And Replacing Batteries, Cd-R& Cd-Rwaudio Discs, Disc Playability

DELETE

The C 525BEE CD Player allows the user to delete unwanted tracks in any desired order in either the Program Mode or the Stop Mode. To Delete tracks, use the sequence of commands below.

In Program Mode:

1Press DELETE. The display indicates "dE d:01"; the player is now ready for first Delete entry. "dE" will change to first memory track after 1 second.

2Use the SKIP & SKIP buttons to select the first track you would like to delete. The track number will flash.

3Press DELETE again to store the selected track number in memory. The selected track number will be deleted in the display. The display will advance to next location. This showing that the player is ready for your second entry but cannot delete track above track 25.

4Repeat Steps 2 and 3 to select the delete the track numbers in memory, up to a maximum of 20 entries.

5To play the stored program, just press PLAY. During playing, the SKIP buttons will access only the tracks still listed. The deleted songs are not listed.

6To clear the memory, press STOP twice ,OPEN/CLOSE to open the drawer, or switch off the power.

In Stop Mode:

1Press DELETE. The display indicates "dE d:01" with total track time. The player is ready for the first Delete entry.

2Use the Direct-Entry Numeric keypad buttons to select the first track you would like to delete. The selected track number will be deleted in the calendar display and the updated total playing time is shown on display.

3Repeat Steps 2 to select the track numbers you would like to delete, up to a maximum of 25 entries but cannot delete track above track 25.

4To play the remaining tracks, just press PLAY. During playing, the SKIP buttons will access only the tracks still listed. The deleted songs are not listed.

5To clear the memory, press STOP, OPEN/CLOSE to open the drawer, or switch off the power.

The Calender display will indicate remaining track listing. After completing playback, the C 525BEE will automatically stop, and the display will again shown all the tracks contained on the inserted CD.

NOTE: In the Program-entry mode, the SKIP and buttons

have a “wrap-around” function: if you SKIP Back repeatedly from Track 01, the number counts down from the final track on the disc. This provides a convenient way to select high-numbered tracks.

INSTALLING AND REPLACING BATTERIES

The remote control requires two 1.5-volt AAA-size (i.e. UM-4 or IEC RO3) cells. Alkaline cells are recommended, to obtain maximum operating life. To open the battery compartment, place your fingertip in the recess on the rear of the remote control, push against the flexible edge of the battery cover and lift the cover upwards. Install fresh cells, orienting them as shown on the diagram within the compartment.

The coil springs should contact the (-) end of each cell. Push the battery compartment cover back and press gently until it latches. In some cases, corrosion or fingerprint oil on the battery contacts may cause poor operation. Remove both cells, rub the metal contacts at both ends of each cell with a clean cloth or a pencil eraser, and re-install the cells, being careful to orient them correctly.

CD-R & CD-RW AUDIO DISCS

The C 525BEE can play back CD-R & CD-RW audio discs that have been recorded on a computer or CD-recorder. The quality of CD-R audio discs varies widely which may affect playability.

Some factors that affect playability:

•The quality of the disc itself. Generally speaking, CD-R & CD-RW blanks from well-renowned companies give better results than unbranded ones.

•The quality of CD-recorder or computer CD re/writer. Some recorders and writers produce better results than others.

•The CD-R & CD-RW was created with high-speed writing. In general, the quality of a CD-R & CD-RW is better when produced at a lower speed against a higher speed on the same recorder or re/writer.

DISC PLAYABILITY

This CD Player is designed to play musical program material only, on CD, CD-R, and CD-RW discs recorded in the 16 bit 44.1 kHz PCM Compact Disc format. It is not designed to play any other disc format, or discs with data or pictures.

WARNING: Attempting to play discs with non-musical programs may result in damage to your playback system.

MAINTENANCE

At periodic intervals, open the disc drawer and wipe with a damp cloth to remove any loose dust.

HANDLING COMPACT DISCS

Handle Compact Discs with care. The playback of a disc will not be impaired by small dust particles, a few light fingerprints, or slight scratches. But large scratches, or a thick layer of oily fingerprints, can prevent the player from tracking the disc. (Incidentally, although the tracking optical pickup “plays” the disc through its clear side, the actual data surface is embedded directly beneath the label, protected only by a very thin coating of lacquer. So a scratch that cuts through the label may damage the disc more than a similar scratch on the transparent “playing” surface. Thus you should treat both surfaces of the disc with care.) Severe scratches or fingerprints may cause the player to mis-track (skipping ahead, or repeating the same passage). Less severe damage may produce very brief bursts of high-frequency noise. The tracking and error- correction circuits of this NAD CD player are unusually sophisticated, providing secure tracking of flawed discs that are unplayable on some other players. Nevertheless, the discs should not be abused or handled carelessly. For best results, grasp the disc only by its edges.

CLEANING DISCS

Soiled discs may be cleaned by wiping with a soft cloth, either dry or moistened, with water. Do NOT use conventional LP record-cleaning products (cleaning solutions, sprays, treated cloths, or anti-static preparations), nor any kind of chemical solvent (alcohol, benzene, etc). A severely soiled disc may be washed in a warm-water spray, possibly with a small amount of a mild kitchen detergent added, and then wiped dry with a clean, soft towel.

When cleaning the disc, use only RADIAL strokes (from centre to edge). Never use a circular wiping motion like that used for cleaning ordinary LP records, because in wiping the disc there is a risk of scratching it. A radial scratch will do the least harm because it affects only a small portion of each circular data track, which can be fully compensated by the player’ s error-correction circuits. But a circular scratch that follows a data track may damage such a long continuous segment of data that it cannot be corrected.

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL DEUTSCH FRANÇAIS ENGLISH

7