Creating entries for computers connected to cascaded SmartViews
You can cascade SmartView 4XPro units using one, two, three or four KVM links and SmartView 2XPro units using one or two KVM links. Section 2.5 explains the rules that you must follow when installing a SmartView cascade. The number of cascade links that you install determines the number of simultaneous users that can access computers on the cascaded SmartViews. Ideally if you are cascading 4XPro units then you should use four cascade links as this will cause no blocking and will allow all four users simultaneous access to all computers.
Each computer name that you add to the
Figure 7 illustrates how port numbers are constructed and how the physical configuration of a cascaded system relates to entries in the on-screen menu. The illustrated configuration is an unlikely configuration in practice but has been chosen for explanation purposes. If you make multiple cascade links then they must be connected to the groups of ports defined in figure 8. These ports have associated group port numbers. The SmartView uses this group port number to connect to the first available port in that group. For example, group port number 21 comprises of ports 1 and 2. If these ports are linked to a cascaded SmartView and users try to connect to computers that are attached to the cascaded SmartView, the system will allocate the cascade links to the first two users on a first come first served basis. Further users that try to connect to computers on the cascaded SmartView will get a message saying that no cascade links are available and they will not be able to connect to the cascaded SmartView until one of the previous users has finished with one of the cascade links.
SmartView XPro | Installation and Use | Page 32 |
