15
FINISHING
DOOR REMOVAL | DOOR | FIGURE 34 |
|
|
Before the glass door can be removed, the control doors must be opened and the hearth strip and screen assembly must be removed.
CONTROL | DOORS |
| |
LOG SHIPPING |
|
BRACKET |
|
HEARTH STRIP
With the control doors pulled open, you can now lift the hearth strip up and away from the front of the fi replace. The curtain assembly can be removed by lifting the rod out from the three
hooks at the top inside |
|
|
edge of the door |
|
|
opening. | HOOKS | FIGURE 33 |
| ||
ROD |
| |
|
|
SCREWS
LOG SHIPPING BRACKET
FIGURE 35
LOG
SHIPPING
BRACKET
The glass door is secured to the firebox with 7 latches 2 on each side, and 3 across the top and 2 screws. Pull the handle of the latch forward, then lift the hooks out from the slot in the door frame to release the top and sides of the door. With a Screw Driver remove the 2 screws in the bottom corners of the door. Lift the door out from the retainer along the bottom of the door, we recommend 2 people remove door due to size and weight. Pull the bottom edge of the door out from the fi replace until the top will pivot forward. Careful door is very heavy.
Before installing the logs, you must fi rst re- move the log shipping bracket.
Lift up to remove. Discard once removed.
GLASS/DOOR REPLACEMENT
1. Place the |
| |
door frame face | GASKET | |
down careful | ||
not to scratch | GLASS | |
the paint. |
| |
2. Center the |
| |
gasketed glass |
| |
inside the door | GLASS | |
frame with the | ||
RETAINER | ||
thick side of the | ||
| ||
gasket facing | DOOR FRAME | |
up. |
|
3. Bend the glass retainers located along
the edge of the door frame over the gasket holding the glass in place. Careful not to break the glass.