Chapter1 Installingand Configuring the SCXI-119X
©NationalInstruments Corporation 1-3 SCXI-1190/1191/1192User Manual
Note If a newerversion of a driver is present on your PC, the installer will not overwri te
the driver.
Safety Instructions
Cautions Donot operate damaged equipment. The safety protection features built into this
instrumentcan become impaired if the instrument becomes damaged in any way. If the
instrument is damaged, do not use it until service-trained personnel can check its safety.
Ifnecessary, return the instrument to National Instruments for service and repair to ensure
thatits safety is not compromised.
Donot operate this instrument in a manner that contradicts the information specified in this
document.Misuse of this instrument could result in a shock hazard.
Do not substitute parts or modify equipment. Because of the danger of introducing
additionalhazards, do no t install unauthorized parts or modify the instrument. Return the
instrument to National Instruments for service and repair to ensure that its safety is not
compromised.
Connectionsthat exceed any of the maximum signal ratings on the SCXI-119Xcan create
ashock or fire hazard or can damage any or all of the devices connected to the SCXI-119X.
National Instruments is not liable for any damages or injuries resulting from incorrect
signal connections.
Clean theinstrument and accessories by brushing off light dust with a soft, nonmetallic
brush.Rem oveother contaminants w ith a stiffn onmetallic brush. The unit must be
completely dryand free from contaminants before returning to service.
Installing the Hardware
The following section describes how to unpack, install, and connect your
SCXI-119Xfor use with an SCXI chassis.
Caution Makesure you read and understand all the safety information in this manual
before you install an SCXI module.