Chapter1 Installingand Configuring the SCXI-119X
SCXI-1190/1191/1192User Manual 1-14 ni.com
1. Turnoff the SCXI chassis power.
2. Removeall signals connected to the SCXI-119X.
Caution Do not remove the SCXI-11 9Xmodule from a chassis that is turned on because
doing so could damage the module.
3. Rotate the thumbscrewssecuring the SCXI-119Xto the chassis
counter-clockwiseuntil t heyare loose, but do not completely remove
the thumbscrews.
4. Removethe SCXI-119Xby pulling steadily on both thumbscrews until
the module slides completely out.
Removing the SCXI-119Xfrom Measurement & Automation Explorer
To remove a module from MAX, complete the following steps:
1. Double-click the Measurement & Automation Explorer icon on
your PC desktop.
2. Expand Devicesand Interfaces. Locate the chassis in the list of
installed devices.
3. Expand Chassis.
4. Right-click on the module or chassis you want to delete and select
Delete.
5. Youare presented a confirmation window. Click Yes to continue
deleting the module or chassis or click No to cancel this action.
Note Deleting an SCXI chassis deletes all modules in the chassis. All configuration
information for these modules is also lost.
YourSCXI chassis and/or SCXI module(s) should now be removed from
the list of installed devicesin MAX.