Index
© National Instruments Corporation I-5 PCI-MXI-2 for Linux
P
parity checking
MXIbus, 6-29
PATH environment variable, 6-1
PCI Bus
options, 6-17
expansion ROM, 6-18
user window and driver window,
6-17
window size, 6-18
PCI-MXI-2 board
common questions, D-1
configuration
See also PCI-MXI-2 Configuration
Editor
configuration EEPROM, 2-3
default settings
Bus Configuration Editor
(table),1-11
Device Configuration Editor
(table),1-11
hardware settings (table), 1-9
Logical Address Configuration
Editor (table), 1-10
hardware description, 1-4
installation, 2-3
quick start installation, 1-6
specifications
electrical, A-3
environmental, A-2
functionality, A-2
MXIbus capability descriptions, A-1
performance, A-3
physical, A-3
requirements, A-2
PCI-MXI-2 Bus Configuration Editor
default settings (table), 1-11
expansion ROM, 6-18
illustration, 6-14
MXI bus
A24/A32 write posting, 6-17
MXI Bus Time Out (BTO), 6-15
MXI CLK10 signal, 6-15
MXI system controller, 6-14
MXI transfer limit, 6-16
MXI-2 auto retry, 6-16
limit on (note), 6-17
synchronous MXI, 6-16
user window and driver window, 6-17
window size, 6-18
PCI-MXI-2 Configuration Editor
default settings (table), 1-11
illustration, 6-3
load configuration from file, 6-4
record configuration to file, 6-4
revert to current configuration, 6-4
saving changes, 6-3
update current configuration, 6-4
PCI-MXI-2 Device Configuration Editor
default controller (LA-1), 6-11
default settings (table), 1-11
illustration, 6-11
number of handlers, 6-12
number of interrupters, 6-13
protocol register, 6-13
read protocol response, 6-13
servant area size, 6-12
system IRQ level, 6-12
PCI-MXI-2 Logical Address Configuration
Editor
address space, 6-6
controls, 6-6
default settings (table), 1-10
device settings group, 6-5
device type
classification, setting, 6-6
illustration, 6-5
logical address parameter
range, default value, 6-5
resource manager delay, 6-10