Chapter 4 VME-MXI-2 Configuration and Installation
PCI-MXI-2 for Linux 4-8 ni.com
Figure 4-5. EEPROM Operation
Onboard DRAM
The VME-MXI-2 can accommodate up to two 1.35 in. DRAM SIMMs.
Table4-1 lists the SIMMs you can use. You can use 32- or 36-bit SIMMs
since DRAM parity is not required. Because the VME-MXI-2 supports
only one organization at a time, all SIMMs installed must be of the same
type. Use Bank 0 first when installing SIMMs. This allows you to install up
to 64 MB. The VME-MXI-2 supports DRAM speeds of 80 ns orfaster.
a. Boot from User Configuration (Factory Configuration Protected) (Default)
b. Boot from Factory Configuration (Factory Configuration Protected)
c. Boot from User Configuration (Factory Configuration Unprotected)
d. Boot from Factory Configuration (Factory Configuration Unprotected)
OFF
1234
U21
OFF
1234
U21
OFF
1234
U21
OFF
1234
U21