Manuals / Brands / Computer Equipment / Network Card / National Instruments / Computer Equipment / Network Card

National Instruments NI WLS/ENET-9163 Configuring the Ethernet Connection

1 36

Download 36 pages, 1.26 Mb

Mounting the NI WLS/ENET-9000 Series to a Panel

Thread inserts are located in the NI WLS/ENET-9000 Series device for

mounting it to a panel. Refer to Figure 5 for dimensions.

Figure 5. Device Panel Mounting Dimensions

Caution Remove the C Series I/O module from the NI WLS/ENET-9163 carrier before

you mount the carrier to the panel. After the NI WLS/ENET-9163 carrier is mounted, you

can reinsert the C Series module.

Configuring the Ethernet Connection

You must have an Ethernet network in order to use the

NIW LS/ENET-9000 Series device. For more information about

configuring your Ethernet connection with the NI WLS/ENET-9000 Series

device, refer to the NI-DAQmx for WLS/ENET Devices Getting Started

Guide that shipped with your device. This document is also accessible from

Start»Programs»National Instruments»NI-DAQ.

6.500 in.

(165.10 mm)

Contents

Main USER GUIDE AND SPECIFICATIONS NI WLS/ENET-9163 NI WLS/ENET-9000 Series Device 802.11g C Series Carrier NATIONAL 802.11g C Series Carrier Dimensions Safety Guidelines Safety Guidelines for Hazardous Voltages Related Documentation Page Page Page Device Documentation and Specifications Training Courses Technical Support on the Web Installing the Software Installing Other Software Example Programs Using the NI WLS/ENET-9000 Series Device Using the NI WLS/ENET-9000 Series Device on a Desktop Mounting the NI WLS/ENET-9000 Series Device Attaching the NI 9910 DIN-Rail Mounting the NI WLS/ENET-9000 Series to a Panel Configuring the Ethernet Connection Setting Up the NI WLS/ENET-9000 Series Device Connecting Power to the NI WLS/ENET-9000 Series Device 10/100BaseT(X) Ethernet Port Connection Device Interface Reset Button LED Indicators Pinouts Trigger Connector Cabling Using the NI WLS/ENET-9000 Series Device C Series I/0 Modules AI Sample Timing Analog Input Analog Input Triggering AI Start Trigger Signal Routing AI Start Trigger to an Output Terminal AI Reference Trigger Signal AI Pause Trigger Signal Analog Input Timing Signal AI Sample Clock Routing AI Sample Clock to an Output Terminal Convert Behavior For Analog Input Modules Scanned Simultaneous Sample-and-Hold Sigma-Delta Getting Started with AI Applications in Software Specifications Analog Input Digital Triggers Static Characteristics PFI Functionality Wireless (NI WLS-9163 Carrier Only) Receiver Sensitivity Antenna (NI WLS-9163 Carrier Only) Ethernet Module I/O States Power Requirements Physical Characteristics Antenna Safety Standards Safety Voltages RF Safety Warning (NI WLS-9163 Carrier Only) Environmental Shock and Vibration Electromagnetic Compatibility Electronic Compatibility Information CE Compliance EU Regulatory Statements Note Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, visit certification, search by model number or product line, and click the appropriate link in the Certification column. Environmental Management Waste Electrical and Electronic Equipment (WEEE) RoHS Regulatory Information United States Canada EuropeEU Declaration of Conformity Europe Restrictions for Use of 2.4 GHz Frequencies in European Community Countries Where to Go for Support