NI WLS/ENET-9163 Carrier User Guide and Specifications 8 ni.com
Installing the Software
NI WLS/ENET-9000 Series device software support for Windows
Vista/XP/2000 is provided by NI-DAQmx.
The DAQ Getting Started Guide, which is accessible from Start»
Programs»National Instruments»NI-DAQ or at ni.com/manuals,
offers NI-DAQmx users step-by-step instructions for installing software
and hardware, configuring channels and tasks, and getting started
developing an application.

Installing Other Software

If you are using other software, refer to the installation instructions that
accompany your software.

Example Programs

The NI-DAQmx CD contains example programs that you can use to
get started programming with the NI WLS/ENET-9000 Series device.
Refer to the NI-DAQmx for WLS/ENET Devices Getting Started Guide that
shipped with your device, and is also accessible from Start»Programs»
National Instruments»NI-DAQ, for more information.
Using the NI WLS/ENET-9000 Series Device

Using the NI WLS/ENET-9000 Series Device on a Desktop

You can use the NI WLS/ENET-9000 Series device on a desktop. Figure 3
shows the stacking grooves for NI ENET-9000 Series devices, and where
to apply the rubber standoffs for the NI WLS/ENET-9000 devices. For
secure desktop use, you can adhere the supplied rubber standoffs to the
underside of the device.
Note NI ENET-9000 Series Only—the NIENET-9000 Series device has underside
grooves that allow it to be stacked on top of other NI ENET-9000 Series devices.
Caution Do not stack an NI WLS-9000 Series device on top of an NI WLS-9000 Series
device.
Caution This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.