National Instruments NI WLS/ENET-9163 LED Indicators

LED Indicators

The LED indicators for the NI WLS/ENET-9000 Series device are listed in

Table 2.

Table 2. LED State/Device Status

LED Description Color LED State Device Status

10/100 Green On Connected at 100 Mbps

Off No Ethernet connection or 10 Mbps

connection

LINK/ACT Yell ow On Ethernet link

Off No Ethernet connection

Blinking Ethernet activity

POWER Green On Power on

Off Power off

STATUS Yellow On Device firmware booting or

resetting to factory default

Off Normal operation

1 Blink No C Series module detected

2 Blinks Firmware/FPGA image corrupted,

update firmware through MAX

3 Blinks Firmware error, reboot

ACTIVE Green On A DAQ task is running on the

device

Off Device available

WLS LINK* Green On Connected and authenticated

Off Not connected to access point

* NIWLS-9163 Only

Contents

Main USER GUIDE AND SPECIFICATIONS NI WLS/ENET-9163 NI WLS/ENET-9000 Series Device 802.11g C Series Carrier NATIONAL 802.11g C Series Carrier Dimensions Safety Guidelines Safety Guidelines for Hazardous Voltages Related Documentation Page Page Page Device Documentation and Specifications Training Courses Technical Support on the Web Installing the Software Installing Other Software Example Programs Using the NI WLS/ENET-9000 Series Device Using the NI WLS/ENET-9000 Series Device on a Desktop Mounting the NI WLS/ENET-9000 Series Device Attaching the NI 9910 DIN-Rail Mounting the NI WLS/ENET-9000 Series to a Panel Configuring the Ethernet Connection Setting Up the NI WLS/ENET-9000 Series Device Connecting Power to the NI WLS/ENET-9000 Series Device 10/100BaseT(X) Ethernet Port Connection Device Interface Reset Button LED Indicators Pinouts Trigger Connector Cabling Using the NI WLS/ENET-9000 Series Device C Series I/0 Modules AI Sample Timing Analog Input Analog Input Triggering AI Start Trigger Signal Routing AI Start Trigger to an Output Terminal AI Reference Trigger Signal AI Pause Trigger Signal Analog Input Timing Signal AI Sample Clock Routing AI Sample Clock to an Output Terminal Convert Behavior For Analog Input Modules Scanned Simultaneous Sample-and-Hold Sigma-Delta Getting Started with AI Applications in Software Specifications Analog Input Digital Triggers Static Characteristics PFI Functionality Wireless (NI WLS-9163 Carrier Only) Receiver Sensitivity Antenna (NI WLS-9163 Carrier Only) Ethernet Module I/O States Power Requirements Physical Characteristics Antenna Safety Standards Safety Voltages RF Safety Warning (NI WLS-9163 Carrier Only) Environmental Shock and Vibration Electromagnetic Compatibility Electronic Compatibility Information CE Compliance EU Regulatory Statements Note Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, visit certification, search by model number or product line, and click the appropriate link in the Certification column. Environmental Management Waste Electrical and Electronic Equipment (WEEE) RoHS Regulatory Information United States Canada EuropeEU Declaration of Conformity Europe Restrictions for Use of 2.4 GHz Frequencies in European Community Countries Where to Go for Support