NEC 4210W Adjusting the picture, Example Adjusting the contrast, Picture adjustment screen

Adjusting the picture

The contrast, brightness, sharpness, color and tint can be adjusted as desired.

Example: Adjusting the contrast

Press the MENU button on the remote controller to dis-

play the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “PICTURE”, then press the “OK” button.

The “PICTURE” screen appears.

2.Use the ▲ and ▼ buttons to select “CONTRAST”.

P I C T U R E
P I C T U R E M O D E		: MEMORY
C O N T R A S T		:
B R I G H T N E S	S	:
S H A R P N E S S		:
C O L O R		:
T I N T		:

C O L O R T E M P : 2		SEL.
N R	: NR – 2
		ADJ.
R E T U R N
		MENU EXIT

3. Use the ◀ and ▶ buttons to adjust the picture.

C O N T R A S T

*If neither the ◀ or ▶ button is pressed within 5 sec- onds, the current setting is set and the previous screen reappears.

4.Press the “OK” button.

The contrast adjustment is completed.

P I C T U R E
P I C T U R E M O D E	: MEMORY
C O N T R A S T	:
B R I G H T N E S S	:
S H A R P N E S S	:
C O L O R	:
T I N T	:

C O L O R T E M P : 2		SEL.
N R	: NR – 2
		ADJ.
R E T U R N
		MENU EXIT

5.Once the adjustment is completed ...

Press the “MENU” button. All menus disappear.

Note: If “CAN NOT ADJUST” appears ...

When trying to enter the PICTURE submenu, make sure PICTURE MODE is set to MEMORY.

Information

⬛Picture adjustment screen

CONTRAST	Changes the picture’s contrast.
BRIGHTNESS ....	Changes the picture’s brightness.
SHARPNESS	Changes the picture’s sharpness.
	Adjusts picture detail of VIDEO
	display.
COLOR	Changes the color density.
TINT	Changes the picture’s tint. (NTSC
	only) Adjust for natural colored
	skin, background, etc.

⬛Adjusting the computer image

Only the contrast and brightness can be adjusted when a computer signal is connected.

⬛Restoring the factory default settings

Select “RESET” under the “PICTURE MODE” settings.

20