NEC 4210W user manual External Speaker Connections

External Speaker Connections

	EXT SPEAKER R			EXT SPEAKER L
	+	–		–	+
		AUDIO		VIDEO
–	+	L		VIDEO IN	–	+
		MONO	VIDEO
		R	IN	S-VIDEO IN
		L		DVD/HD
			DVD/HD	Y/Y
		R	IN
				CB/PB
		L	RGB	CR/PR
		MONO
		R	IN	RGB
		L	AUDIO	RGB IN
			OUT
		R
		(VARIABLE)
		REMOTE		EXTERNAL
		CONTROL		CONTROL

External speakers may be connected to the PlasmaSync 4210W to reproduce sound from VIDEO, DVD or RGB signal sources.

External speakers may be connected directly to the SPEAK- ERS terminals or indirectly by connecting a stereo system amplifier to the audio outputs.

CAUTION: Unplug the PlasmaSync 4210W and all connected components before connecting external speakers. Use only speakers with 6-ohm impedance and a power output rating of 7 watts or more.

To connect external speakers directly to the PlasmaSync 4210W:

1.Strip the ends of the speaker wires.

2.Press down the tabs below the SPEAKERS terminals, insert the speaker wire and release the tab to secure the speaker wire connection:

[a]Connect the right speaker (located at right side

of the monitor when viewed from the front) positive (+) wire to RIGHT +.

[b]Connect the right speaker negative (–) wire to RIGHT -.

[c]Connect the left speaker negative (–) wire to LEFT–.

[d]Connect the left speaker positive wire (+) to LEFT+.

10