NEC 515 Powering-On the Phone, Language Display, Frequency Bands, Turning the Phone On

Powering-On the Phone

Turning the Phone On

￿Press and HOLD (On-Off) to turn On the phone.

The screen displays mMode animation during the powering-on process. After the powering On process, the phone displays the Idle screen.

You may need to input your PIN1 code or phone security code (refer to page 15).

Turning the Phone Off

￿Press and HOLD (On-Off) until it powers down. The power down screen displays the NEC High Definition Mobile graphic and the phone powers Off.

After powering Off or turning the wireless phone Off, you must wait three seconds before powering On.

Language Display

If the display is showing any language other than your own, proceed as follows:

￿Press Softkey 1 (Main) to display the Main Menu. Press 1, 2, and 5 to display the Language screen. (See Flag.) Press the appropriate key to select the required language.

Press (End) to return to the Idle screen.

Frequency Bands

The type of frequency band that you use depends upon your location. (See Flag.)

￿Press Softkey 1 (Main), 1, 5, and 4 to display Band screen.

Press 1 to select the 850/1900 frequency band if you are located in the United States or press 2 to select the 900/1800 frequency band if you are located in Europe.

￿Do not remove the battery to turn your phone Off as this may cause loss of stored information.

Language M125

￿The phone supports the above languages and the keyboard symbols have been chosen for world-wide operation.

￿Frequency bands need to be changed for the wireless phone to work properly when traveling outside the United States.

19