Auto Redial
The auto redial option allows the wireless phone to dial an unsuccessful call up to 10 times. To set the auto redial On or Off, proceed as follows:
Press Softkey 1 (Main), 1, 3, and 3 to display the Auto redial screen.
Input 1 to turn On the automatic redial or 2 to turn Off the automatic redial. The display returns to the Call settings menu.
Send Own Number (Caller ID)
When you make a call, you can send your own phone number to display on the dialed phone.
Press Softkey 1 (Main), 1, 3, and 4 to display Send own number screen.
Press 1 to turn On sending your number or 2 to turn Off sending your number and return to the Call settings menu.
Security Settings
The Security Settings enable you to protect your phone from improper and unauthorized use. The PIN codes, security codes, and password codes are 4 to 8 digit numbers.
Changing PINS
PIN 1 and PIN 2 codes are provided by your network service provider. The security code is user defined. The default security code is ‘0000’ until you change it. Once the security code is changed, the default is no longer valid.
Changing PIN 1 Code
Your phone can be set up so it needs your PIN 1 code entered when powering On, before the phone can be used at all. If the PIN 1 code is not entered, received calls can not be answered. If you input your PIN 1 code incorrectly more than three times (not necessarily in the same session) not even the correct PIN 1 code works and you will have to contact your service provider for a code to unblock your SIM card.
To change the PIN1, the SIM PIN1 lock on page 42 must be set to On for PIN 1 change to be enabled.
Press Softkey 1 (Main), 1, 4, 1, and 1 to display the PIN 1 change screen.
Key in the current code. You are prompted to input the new code and then to input it again as confirmation. A confirmation screen displays momentarily and then the Security settings menu displays.
41
