3.1.2Controlling WebPAM PRO with a Remote Computer
NOTES:
If using a proxy server for making access to the Internet, you need to bypass the proxy server. See Appendix A for the setting procedure.
If a firewall function is running on the system (server), you may not controll from the remote computer. In this case, change the setting to make it possible to connect from the remote computer (e.g. check the port setting for firewall).
The procedure provided below is for connecting from the Windows environment. If you want to connect from the Linux environment, after performing Steps 1 and 2 shown below, follow the Steps 2 and 3 in “3.1.1 Controlling WebPAM PRO with a Local Computer” instead of Step3 below. Then go back to Step 4 below.
1.Start the Web browser.
2.Enter the IP address of the Promise RAID system to be controlled in the browser address and press Enter.
For example, if the IP address is "10.10.10.10," type "https://10.10.10.10:8443/promise."
If a session with the remote system can be established, the WebPAM PRO logon screen appears.
3.The Security Alert window will appear. Click [Yes].
The [Block by Security Enforcement] screen may appear. Click [Add] to register WebPAM PRO to a zone in the trusted site.
4.On the logon screen, perform the following operations:
Enter your user ID and password in the [User Name] and [Password] fields, respectively. (At the first logon, specify "administrator" and "password" as the user ID and password, respectively.)
Click [Login].
3.1.3Exiting WebPAM PRO
Click [Logout] on the WebPAM PRO Header of the WebPAM PRO operation window to exit the WebPAM PRO operation window. Click [x] at the upper right corner of the WebPAM PRO logon window to exit it.
- 7 -