2. Installation/Uninstallation

2.1 Operation Environment for WebPAM PRO

The following operation environment is required for the proper operation of WebPAM PRO.

-Hardware

NEC EXPRESS5800 server available for the “N8103-105 Disk Array Controller (SAS)”

-Software

RHEL AS/ES 4 Update 5 or later ML4SP2 or later

IMPORTANT:

„Only users authorized as root are permitted to install and uninstall WebPAM PRO.

„If you have used Web-based Promise Array Manager (WebPAM, N8103-101/103 management utility), be sure to uninstall WebPAM before installing WebPAM PRO. You cannot use WebPAM PRO with WebPAM. For uninstalling WebPAM, see "Web-based Promise Array Manager User’s Guide (Linux Version)”.

2.2Installing WebPAM PRO

1.Untar the WebPAM PRO installation module.

Ex.) As the WebPAM PRO installation module is “WPPInst-1.00.tar.gz”:

#tar -zxvf WPPInst-1.00.tar.gz

2.Execute the WebPAM PRO installation script as follows:

#./WPPInst.sh –e

3.Check that WebPAM PRO has been successfully installed.

WPP: Installation completed. Please reboot the system.

After installation completed, restart the system.

- 3 -