(Do not provide setting for any option with "*unavailable." Failure to follow this instruction may cause the system to operate improperly.)

Run Time - Start Time

Enter the start time. You can set the hour with the left

 

pull-down menu and the minute in five minutes with the right

 

pull-down menu.

Recurrence Pattern

The display screen varies depending on the Recurrence

 

Pattern selected in the previous screen.

 

[daily]

 

•

[Every–days] (*unavailable)

 

[weekly]

 

•

[Every–weeks] (*unavailable)

 

•

Check the checkbox of the day of the week on which you

 

 

want to run redundancy check.

 

[monthly]

 

•

[Day of Month] Set the date on which you want to run

 

 

redundancy check every month.

 

[The] (*unavailable)

 

•

Check the checkbox of the month in which you want to run

 

 

redundancy check.

Range of Recurrence

Start from: Start date

 

End on–No End Date: Select this option.

 

 

–End After: (*unavailable)

 

 

–Until: (*unavailable)

Redundancy Check

[Auto Fix] Set the processing to be performed when an

Options

inconsistency error is detected.

 

If the checkbox is checked, data is repaired from other HDDs

 

configuring RAID at detection of an inconsistency error.

 

If the checkbox is not checked, a consistency error is not

 

repaired at detection of the error.

 

[Pause on Error] Set whether processing is paused if an

 

inconsistency error is detected.

 

If the checkbox is checked, processing is paused at detection

 

of an inconsistency error.

 

However, if Auto Fix is also checked, processing is paused

 

only when the error cannot be repaired.

 

If the checkbox is not checked, the processing is not paused

 

in spite of detection of an inconsistency error.

 

Note: Redundancy check without Auto Fix for a logical drive

 

not initialized or not subject to redundancy check in the Auto

 

Fix mode at all cannot be scheduled. If you try, the following

 

message is registered and the redundancy check is not done.

 

Failed to create the scheduler: Redundancy Check can not be

 

scheduled for logical drive x as it is not Fully initialized or

 

AutoFix is not enable

 

In this case, schedule the redundancy check in "Auto Fix."

- 41 -