
Component Names and Functions continued
Remote Control
LED INDICATION
POWER ON/OFF
SLEEP
ASPECT
PIP
STILL
VOLUME UP / DN (ST)
MENU
PROGRAM / ADJUST (WX)
ENTER
DISPLAY
AV2
AV1
Installing the Batteries
1. Open the battery cover.
z Slide back and remove the battery cover in the direction of the arrow.
2. Installing the batteries.
zInstall two included Size AA batteries
observing the correct
TV TUNER
SOURCE SELECT
ZOOM
CCD (Close Caption Display)
SWAP
CH UP / DN (ST)
MUTE
SELECT (ST)
MTS
NUMBER KEYPAD
AV3
AV4
Handling the Remote Control
Use the remote control within about 16 feet from front of the unit’s remote- control sensor and within 30 degrees on both sides.
Within 30 degrees | Within 30 degrees |
About 10 feet
About 10 feet
About 16 feet
3. Close the battery cover.
z Replace the battery cover in the direction of the arrow and snap it back into place.
CAUTION
z Do not mix new and old batteries together. The batteries could explode or leak, resulting in fires, physical injury, or stains.
z When inserting batteries, observe their correct polarities as marked on the product. If inserted in the wrong direction, the batteries could explode or leak, resulting in fires, physical injury, or stains.
ATTENTION
zDo not drop the remote control.
zTo avoid possible failures, do not splash the remote control with water or put it on a wet object.
zIf leaving the remote control out of use for an extended period of time, remove the batteries from it.
zIf the remote control does not respond properly, replace the batteries.
zStrong light such as direct sunlight exposed on the photoreceptor of the remote control can cause operational failure. Position this unit to avoid direct contact with such light.
5