NEC LCD1850X user manual OSM On-Screen-Manager Controls, Control Menu, English-9

Controls

OSM (On-Screen-Manager) Controls

The OSM controls on the front of the monitor function as follows: To access OSM press any of the control buttons (, , -, +).

To change DVI/D-SUB signal input, press the NEXT button.

To rotate OSM between Landscape and Portrait modes, press the RESET button.

NOTE: OSM menu must be closed in order to change signal input and to rotate.

Control	Menu
EXIT	Exits the OSM controls.
	Exits to the OSM main menu.
CONTROL /	Moves the highlighted area left/right to select control
	menus.
	Moves the highlighted area up/down to select one of the
	controls.
ADJUST -/+	Moves the bar left/right to increase or decrease the
	adjustment.
	Activates Auto Adjust function.
	Enter the sub menu.
NEXT	Moves the highlighted area of main menu right to select
	one of the controls.
RESET	Resets the highlighted control menu to the factory setting.
	Resets the highlighted control to the factory setting.

NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the RESET function by pressing the EXIT button.

English-9

English

01b_English 9 2/4/01, 3:39 pm