Long Cable Compensation Adjustment
Long Cable Compensation should only be performed when using extended length cables or to compensate for a
1.For optimal adjustment, download the ÒLCD Long Cable Comp Test PatternÓ and ÒRead MeÓ file at www.necmitsubishi.com and display the test pattern during this adjustment.
2.In order to perform the adjustment, enter the Advanced OSM:
¥Turn off your monitor.
¥Turn on your monitor by pressing the ÒPOWERÓ and ÒSELECTÓ buttons simultaneously to open the Advanced OSM menu.
3. In Tag 3, set the Auto Adjust Level (Auto SW) to ÒDETAILÓ.
| "Size" "Fine" | "Contrast" | Black Level, | Time |
| "Position" | Long cable capability *1 | ||
|
|
| ||
|
|
|
|
|
SIMPLE | O | X | X | 1.5 seconds |
FULL | O | O | X | 2 seconds |
DETAIL | O | O | O | 10 to 20 seconds |
O: Automatic adjustment is performed.
X: Automatic adjustment is not performed.
*1: Black level, RGB sharpness, RGB delay and RGB position are adjusted using Long Cable Software.
4.In Tag 4, select ÒAUTOÓ and press ÒSELECTÓ to perform full adjustment.
5.
6.Exit the Advanced OSM by turning off and restarting your monitor.
For additional information on user controls and software utilities, visit our website at www.necmitsubishi.com
11
LCD2180UXManual1020.p65 | 11 | 10/21/03, 9:10 AM |
