Manuals / NEC / Computer Equipment / Laptop

NEC manual Removing the CPU, NEC Versa M320 Disassembly Manual, Removing the heat plate

Models: M320

1 28

Download 28 pages 27.47 Kb

Page 10

Image 10

Removing the CPU

Removing the CPU

To remove the CPU, first remove the Keyboard (see Removing the Keyboard), then perform the following steps:

1. Remove the screw retaining the heat plate as shown in Fig. 13

Fig. 13 Removing the screws retaining the heat plate

2. Carefully remove the heat plate as shown in Fig 14

Fig. 14 Removing the heat plate

3. Release the screws on the LED board as shown in Fig 15

A = M2.5x7 Silver

B = M2x3 Silver

Others

M2x4.5 Silver

NEC Versa M320 Disassembly Manual

Page 10

Image 10

NEC manual Removing the CPU, NEC Versa M320 Disassembly Manual, Removing the heat plate

Contents

Versa M320 Disassembly Manual Table of contents NEC Versa M320 Disassembly Manual Overview Disassembly InstructionsReassembly Instructions Technician Notes Avoid Electrostatic Discharge Power Supply UnitHazardous Voltage AVERTISSEMENT Removing the Battery Removing the Hard Disk Drive Removing the Memory Module Removing the Wireless LAN & MDC Modem Module Removing the Keyboard Fig. 11 Releasing the optical drive Removing the optical disk driveFig. 10 Removing the keyboard flat cable Fig. 12 Removing the optical drive Removing the CPU Fig. 14 Removing the heat plate 4. Lift up the LED board as shown in Fig Fig. 19 Releasing the CPU Heat Sink Fig. 18 Lifting up the CPU fanM2x10 Silver Fig. 20 Removing the heat sink Fig. 21 Releasing the CPU Fig. 22 Removing the Coil Removing the LCD ModuleFig. 23 Removing the LCD hinges screws Fig. 24 Releasing the plastic hinge covers Fig. 25 Lifting up the LCD module Disassembling the LCD Panel 4. Unscrew all screws encircled in Fig Fig. 32 Removing Wireless Antenna Removing the Top CoverFig. 31 Removing the LCD Panel hinges A = M2.5x7 Silver B = M2x4.5 Silver M2.5x7 Silver Fig. 33 Removing the top cover screwsA = M2x4.5 Silver Fig. 36 Touch Pad Assembly Removing the Touch PadFig. 35 Removing the top cover Fig. 37 Removing the FDD Removing the Floppy Disk DriveFig. 38 Lifting up the FDD Fig. 39 Audio Board screws and speakers connector Removing the Audio BoardFig. 40 Removing the audio front panel Fig. 43 Removing the HDD flat cable connector Removing the Main BoardFig. 42 Removing the RTC Battery Fig. 41 Lifting the Audio Board A = M2.5x5 Silver B = M2x4 Silver Fig. 44 Removing the main board screwsFig. 45 Remove the spacers on the I/O panel C = M2.5x5 Silver D = M5x6 Silver Fig. 46 Removing Main Board Removing the speakersFig. 47 Screw at Audio Board Holder Description DIP Switch SettingDip Switch Seeting Screws Versa M320 Disassembly Manual