Removing the speakers, NEC Versa M320 Disassembly Manual | NEC

Fig. 46 Removing Main Board

Fig. 46 Removing Main Board

Removing the speakers

To remove the speaker, first open the Top Cover (see Removing the Top Cover), remove the FDD (see Removing the FDD) and remove Audio Board (see Removing the Audio Board) then perform the following steps:

1. Remove the screws holding the audio board holder as shown in Fig. 47

Fig. 47 Screw at Audio Board Holder

2. Carefully remove the speaker assembly from bottom base and put it aside.

M2x4.5 Silver

NEC Versa M320 Disassembly Manual

Page 25

Image 25

NEC manual Removing the speakers, NEC Versa M320 Disassembly Manual, Removing Main Board, Screw at Audio Board Holder

Contents

Versa M320 Disassembly Manual NEC Versa M320 Disassembly Manual Table of contents Reassembly Instructions Disassembly InstructionsOverview Technician Notes Hazardous Voltage Power Supply UnitAvoid Electrostatic Discharge AVERTISSEMENT Removing the Hard Disk Drive Removing the Battery Removing the Memory Module Removing the Wireless LAN & MDC Modem Module Removing the Keyboard Fig. 10 Removing the keyboard flat cable Removing the optical disk driveFig. 11 Releasing the optical drive Fig. 12 Removing the optical drive Fig. 14 Removing the heat plate Removing the CPU 4. Lift up the LED board as shown in Fig Fig. 19 Releasing the CPU Heat Sink Fig. 18 Lifting up the CPU fanM2x10 Silver Fig. 21 Releasing the CPU Fig. 20 Removing the heat sink Fig. 22 Removing the Coil Removing the LCD ModuleFig. 23 Removing the LCD hinges screws Fig. 25 Lifting up the LCD module Fig. 24 Releasing the plastic hinge covers Disassembling the LCD Panel 4. Unscrew all screws encircled in Fig Fig. 32 Removing Wireless Antenna Removing the Top CoverFig. 31 Removing the LCD Panel hinges A = M2.5x7 Silver B = M2x4.5 Silver M2.5x7 Silver Fig. 33 Removing the top cover screwsA = M2x4.5 Silver Fig. 36 Touch Pad Assembly Removing the Touch PadFig. 35 Removing the top cover Fig. 37 Removing the FDD Removing the Floppy Disk DriveFig. 38 Lifting up the FDD Fig. 39 Audio Board screws and speakers connector Removing the Audio BoardFig. 40 Removing the audio front panel Fig. 42 Removing the RTC Battery Removing the Main BoardFig. 43 Removing the HDD flat cable connector Fig. 41 Lifting the Audio Board Fig. 45 Remove the spacers on the I/O panel Fig. 44 Removing the main board screwsA = M2.5x5 Silver B = M2x4 Silver C = M2.5x5 Silver D = M5x6 Silver Fig. 46 Removing Main Board Removing the speakersFig. 47 Screw at Audio Board Holder Dip Switch DIP Switch SettingDescription Seeting Screws Versa M320 Disassembly Manual