Removing the optical disk drive | NEC M320 guide

Fig. 10 Removing the keyboard flat cable

Fig. 10 Removing the keyboard flat cable

Removing the optical disk drive

To remove the ODD, first remove the keyboard (see Removing the Keyboard), then perform the following steps:

1. Remove the screws retaining the optical drive connector as shown in Fig. 11

Fig. 11 Releasing the optical drive

2. Remove the optical drive out from the base unit as shown in Fig. 12

M2.5x4 Silver

Fig. 12 Removing the optical drive

NEC Versa M320 Disassembly Manual

Page 9

Image 9

NEC manual Removing the optical disk drive, NEC Versa M320 Disassembly Manual, Removing the keyboard flat cable

Contents

Versa M320 Disassembly Manual NEC Versa M320 Disassembly Manual Table of contents Reassembly Instructions Disassembly InstructionsOverview Technician Notes Hazardous Voltage Power Supply UnitAvoid Electrostatic Discharge AVERTISSEMENT Removing the Hard Disk Drive Removing the Battery Removing the Memory Module Removing the Wireless LAN & MDC Modem Module Removing the Keyboard Fig. 10 Removing the keyboard flat cable Removing the optical disk driveFig. 11 Releasing the optical drive Fig. 12 Removing the optical drive Fig. 14 Removing the heat plate Removing the CPU 4. Lift up the LED board as shown in Fig Fig. 18 Lifting up the CPU fan Fig. 19 Releasing the CPU Heat SinkM2x10 Silver Fig. 21 Releasing the CPU Fig. 20 Removing the heat sink Removing the LCD Module Fig. 22 Removing the CoilFig. 23 Removing the LCD hinges screws Fig. 25 Lifting up the LCD module Fig. 24 Releasing the plastic hinge covers Disassembling the LCD Panel 4. Unscrew all screws encircled in Fig Removing the Top Cover Fig. 32 Removing Wireless AntennaFig. 31 Removing the LCD Panel hinges Fig. 33 Removing the top cover screws A = M2.5x7 Silver B = M2x4.5 Silver M2.5x7 SilverA = M2x4.5 Silver Removing the Touch Pad Fig. 36 Touch Pad AssemblyFig. 35 Removing the top cover Removing the Floppy Disk Drive Fig. 37 Removing the FDDFig. 38 Lifting up the FDD Removing the Audio Board Fig. 39 Audio Board screws and speakers connectorFig. 40 Removing the audio front panel Fig. 42 Removing the RTC Battery Removing the Main BoardFig. 43 Removing the HDD flat cable connector Fig. 41 Lifting the Audio Board Fig. 45 Remove the spacers on the I/O panel Fig. 44 Removing the main board screwsA = M2.5x5 Silver B = M2x4 Silver C = M2.5x5 Silver D = M5x6 Silver Removing the speakers Fig. 46 Removing Main BoardFig. 47 Screw at Audio Board Holder Dip Switch DIP Switch SettingDescription Seeting Screws Versa M320 Disassembly Manual