Removing the Audio Board
To remove the Audio board, first remove the Top Cover (see Removing the Top Cover), remove the FDD (see Removing the FDD) then perform the following steps:
1.Remove the screws on the Audio board and disconnect the speaker cable as shown in Fig. 39 .
Fig. 39 Audio Board screws and speakers connector
2. Carefully remove the audio front panel as shown in Fig. 40 and put it aside.
Fig. 40 Removing the audio front panel
3. Lift up the audio board as shown in Fig. 41 and put it aside.
M2x4.5 Silver
NEC Versa M320 Disassembly Manual | Page 22 |
