Removing the Keyboard, NEC Versa M320 Disassembly Manual | NEC

Removing the Keyboard

Fig. 8 Wireless LAN & MCD Modem Module

3.Unclip and remove the wireless LAN module.

4.Carefully lift up the MDC modem module.

5.Disconnect the cable attached to the MDC modem and put the modem aside.

Removing the Keyboard

To remove the Keyboard, first remove the battery (see Removing the Battery), then perform the following steps:

1. Use a flat screwdriver to lift up the keyboard cover as shown in Fig. 9

Fig. 9 Removing the keyboard cover

2. Lift up the keyboard and disconnect it from the system as shown in Fig. 10

M2.5x5 Silver

NEC Versa M320 Disassembly Manual

Page 8

Image 8

NEC manual Removing the Keyboard, NEC Versa M320 Disassembly Manual

Contents

Versa M320 Disassembly Manual Table of contents NEC Versa M320 Disassembly Manual Disassembly Instructions Reassembly InstructionsOverview Technician Notes Power Supply Unit Hazardous VoltageAvoid Electrostatic Discharge AVERTISSEMENT Removing the Battery Removing the Hard Disk Drive Removing the Memory Module Removing the Wireless LAN & MDC Modem Module Removing the Keyboard Removing the optical disk drive Fig. 10 Removing the keyboard flat cableFig. 11 Releasing the optical drive Fig. 12 Removing the optical drive Removing the CPU Fig. 14 Removing the heat plate 4. Lift up the LED board as shown in Fig M2x10 Silver Fig. 18 Lifting up the CPU fanFig. 19 Releasing the CPU Heat Sink Fig. 20 Removing the heat sink Fig. 21 Releasing the CPU Fig. 23 Removing the LCD hinges screws Removing the LCD ModuleFig. 22 Removing the Coil Fig. 24 Releasing the plastic hinge covers Fig. 25 Lifting up the LCD module Disassembling the LCD Panel 4. Unscrew all screws encircled in Fig Fig. 31 Removing the LCD Panel hinges Removing the Top CoverFig. 32 Removing Wireless Antenna A = M2x4.5 Silver Fig. 33 Removing the top cover screwsA = M2.5x7 Silver B = M2x4.5 Silver M2.5x7 Silver Fig. 35 Removing the top cover Removing the Touch PadFig. 36 Touch Pad Assembly Fig. 38 Lifting up the FDD Removing the Floppy Disk DriveFig. 37 Removing the FDD Fig. 40 Removing the audio front panel Removing the Audio BoardFig. 39 Audio Board screws and speakers connector Removing the Main Board Fig. 42 Removing the RTC BatteryFig. 43 Removing the HDD flat cable connector Fig. 41 Lifting the Audio Board Fig. 44 Removing the main board screws Fig. 45 Remove the spacers on the I/O panelA = M2.5x5 Silver B = M2x4 Silver C = M2.5x5 Silver D = M5x6 Silver Fig. 47 Screw at Audio Board Holder Removing the speakersFig. 46 Removing Main Board DIP Switch Setting Dip SwitchDescription Seeting Screws Versa M320 Disassembly Manual