Removing the Wireless LAN & MDC Modem Module | NEC M320 specification

Removing the Wireless LAN & MDC Modem Module

2. Unclip memory module as shown in Fig. 6

Fig. 6 Removing the memory module

3. Remove the memory module from its slot and put it aside.

Removing the Wireless LAN & MDC Modem Module

To remove the Wireless and MDC Modem Module, first remove the battery (see Removing the Battery), then perform the following steps:

1. Remove the screw retaining the mini PCI slot cover as shown in Fig. 7

Fig. 7 Removing the screws screw retaining the mini PCI slot cover

2.Disconnect the wireless antenna wires from the wireless module and release the two screws retaining the MCD Modem.

M2.4x4.5 Silver

NEC Versa M320 Disassembly Manual

Page 7

Image 7

NEC manual Removing the Wireless LAN & MDC Modem Module, NEC Versa M320 Disassembly Manual

Contents

Versa M320 Disassembly Manual NEC Versa M320 Disassembly Manual Table of contents Technician Notes Disassembly InstructionsReassembly Instructions Overview AVERTISSEMENT Power Supply UnitHazardous Voltage Avoid Electrostatic Discharge Removing the Hard Disk Drive Removing the Battery Removing the Memory Module Removing the Wireless LAN & MDC Modem Module Removing the Keyboard Fig. 12 Removing the optical drive Removing the optical disk driveFig. 10 Removing the keyboard flat cable Fig. 11 Releasing the optical drive Fig. 14 Removing the heat plate Removing the CPU 4. Lift up the LED board as shown in Fig Fig. 19 Releasing the CPU Heat Sink Fig. 18 Lifting up the CPU fanM2x10 Silver Fig. 21 Releasing the CPU Fig. 20 Removing the heat sink Fig. 22 Removing the Coil Removing the LCD ModuleFig. 23 Removing the LCD hinges screws Fig. 25 Lifting up the LCD module Fig. 24 Releasing the plastic hinge covers Disassembling the LCD Panel 4. Unscrew all screws encircled in Fig Fig. 32 Removing Wireless Antenna Removing the Top CoverFig. 31 Removing the LCD Panel hinges A = M2.5x7 Silver B = M2x4.5 Silver M2.5x7 Silver Fig. 33 Removing the top cover screwsA = M2x4.5 Silver Fig. 36 Touch Pad Assembly Removing the Touch PadFig. 35 Removing the top cover Fig. 37 Removing the FDD Removing the Floppy Disk DriveFig. 38 Lifting up the FDD Fig. 39 Audio Board screws and speakers connector Removing the Audio BoardFig. 40 Removing the audio front panel Fig. 41 Lifting the Audio Board Removing the Main BoardFig. 42 Removing the RTC Battery Fig. 43 Removing the HDD flat cable connector C = M2.5x5 Silver D = M5x6 Silver Fig. 44 Removing the main board screwsFig. 45 Remove the spacers on the I/O panel A = M2.5x5 Silver B = M2x4 Silver Fig. 46 Removing Main Board Removing the speakersFig. 47 Screw at Audio Board Holder Seeting DIP Switch SettingDip Switch Description Screws Versa M320 Disassembly Manual