Manuals / NEC / Computer Equipment / Laptop

NEC manual NEC Versa M320 Disassembly Manual, Removing the heat sink, Releasing the CPU, Page

Models: M320

1 28

Download 28 pages 27.47 Kb

Page 13

Image 13

Fig. 20 Removing the heat sink

Fig. 20 Removing the heat sink

Note: To ease the removal of the heat sink from the CPU socket;, you might consider to disconnect LCD cable before lifting up the heat sink..

9.Use a flat screwdriver to unlock the CPU from the CPU socket and carefully lift up the CPU and put it in a safe place.

Fig. 21 Releasing the CPU

NEC Versa M320 Disassembly Manual

Page 13

Image 13

NEC manual NEC Versa M320 Disassembly Manual, Removing the heat sink, Releasing the CPU, Page

Contents

Versa M320 Disassembly Manual NEC Versa M320 Disassembly Manual Table of contents Reassembly Instructions Disassembly InstructionsOverview Technician Notes Hazardous Voltage Power Supply UnitAvoid Electrostatic Discharge AVERTISSEMENT Removing the Hard Disk Drive Removing the Battery Removing the Memory Module Removing the Wireless LAN & MDC Modem Module Removing the Keyboard Fig. 10 Removing the keyboard flat cable Removing the optical disk driveFig. 11 Releasing the optical drive Fig. 12 Removing the optical drive Fig. 14 Removing the heat plate Removing the CPU 4. Lift up the LED board as shown in Fig Fig. 19 Releasing the CPU Heat Sink Fig. 18 Lifting up the CPU fanM2x10 Silver Fig. 21 Releasing the CPU Fig. 20 Removing the heat sink Fig. 22 Removing the Coil Removing the LCD ModuleFig. 23 Removing the LCD hinges screws Fig. 25 Lifting up the LCD module Fig. 24 Releasing the plastic hinge covers Disassembling the LCD Panel 4. Unscrew all screws encircled in Fig Fig. 32 Removing Wireless Antenna Removing the Top CoverFig. 31 Removing the LCD Panel hinges A = M2.5x7 Silver B = M2x4.5 Silver M2.5x7 Silver Fig. 33 Removing the top cover screwsA = M2x4.5 Silver Fig. 36 Touch Pad Assembly Removing the Touch PadFig. 35 Removing the top cover Fig. 37 Removing the FDD Removing the Floppy Disk DriveFig. 38 Lifting up the FDD Fig. 39 Audio Board screws and speakers connector Removing the Audio BoardFig. 40 Removing the audio front panel Fig. 42 Removing the RTC Battery Removing the Main BoardFig. 43 Removing the HDD flat cable connector Fig. 41 Lifting the Audio Board Fig. 45 Remove the spacers on the I/O panel Fig. 44 Removing the main board screwsA = M2.5x5 Silver B = M2x4 Silver C = M2.5x5 Silver D = M5x6 Silver Fig. 46 Removing Main Board Removing the speakersFig. 47 Screw at Audio Board Holder Dip Switch DIP Switch SettingDescription Seeting Screws Versa M320 Disassembly Manual