Removing the Top Cover, Removing the LCD Panel hinges | NEC M320

Fig. 31 Removing the LCD Panel hinges

Fig. 30 Lifting up the LCD panel and disconnecting the inverter board

6.Remove the screws on both sides of the LCD panel in order to release the LCD hinges as shown in Fig. 31

Fig. 31 Removing the LCD Panel hinges

7.Remove the screws on both sides of the wireless antenna as shown in Fig. 32, release the wires from the adhesive tapes and put the wireless antenna aside.

Fig. 32 Removing Wireless Antenna

Removing the Top Cover

To remove the Top Cover, first remove then remove the keyboard (see Removing the keyboard), remove the CPU (see Removing the CPU), remove the LCD module (see Removing the LCD Module) then perform the following steps:

M2x3 Silver

M2x4.5 Silver

NEC Versa M320 Disassembly Manual

Page 18

Image 18

NEC Removing the Top Cover, NEC Versa M320 Disassembly Manual, Removing the LCD Panel hinges, Removing Wireless Antenna

Contents

Versa M320 Disassembly Manual Table of contents NEC Versa M320 Disassembly Manual Overview Disassembly InstructionsReassembly Instructions Technician Notes Avoid Electrostatic Discharge Power Supply UnitHazardous Voltage AVERTISSEMENT Removing the Battery Removing the Hard Disk Drive Removing the Memory Module Removing the Wireless LAN & MDC Modem Module Removing the Keyboard Fig. 11 Releasing the optical drive Removing the optical disk driveFig. 10 Removing the keyboard flat cable Fig. 12 Removing the optical drive Removing the CPU Fig. 14 Removing the heat plate 4. Lift up the LED board as shown in Fig Fig. 18 Lifting up the CPU fan Fig. 19 Releasing the CPU Heat SinkM2x10 Silver Fig. 20 Removing the heat sink Fig. 21 Releasing the CPU Removing the LCD Module Fig. 22 Removing the CoilFig. 23 Removing the LCD hinges screws Fig. 24 Releasing the plastic hinge covers Fig. 25 Lifting up the LCD module Disassembling the LCD Panel 4. Unscrew all screws encircled in Fig Removing the Top Cover Fig. 32 Removing Wireless AntennaFig. 31 Removing the LCD Panel hinges Fig. 33 Removing the top cover screws A = M2.5x7 Silver B = M2x4.5 Silver M2.5x7 SilverA = M2x4.5 Silver Removing the Touch Pad Fig. 36 Touch Pad AssemblyFig. 35 Removing the top cover Removing the Floppy Disk Drive Fig. 37 Removing the FDDFig. 38 Lifting up the FDD Removing the Audio Board Fig. 39 Audio Board screws and speakers connectorFig. 40 Removing the audio front panel Fig. 43 Removing the HDD flat cable connector Removing the Main BoardFig. 42 Removing the RTC Battery Fig. 41 Lifting the Audio Board A = M2.5x5 Silver B = M2x4 Silver Fig. 44 Removing the main board screwsFig. 45 Remove the spacers on the I/O panel C = M2.5x5 Silver D = M5x6 Silver Removing the speakers Fig. 46 Removing Main BoardFig. 47 Screw at Audio Board Holder Description DIP Switch SettingDip Switch Seeting Screws Versa M320 Disassembly Manual