NEC NDA-30135 manual Build a Master Database File

INSTALLATION & CONFIGURATION Attendant Monitor Operations Manual

Tenant Number Database (cont)

Initialize

Component

Configuring the Tenant Number Database

This database must be configured before the Attendant Monitor application can operate. The database values are set using the APM Applications Manager Main Menu-- Selecting the Application Configuration option. The general sequence is the following:

1.Build a Master Database File

Enter data into the master database fields to add the necessary phone line numbers.

2.Process the Application Database

Use the Process Application Databases option on the APM Database Administration menu to create the application database file.

(When the Process option is activated, data is drawn from the master database and converted to the formats specified in the application definition file.)

3.Install the Application Database

Use the Install Application Databases option on the APM Database Administration menu to enable Attendant Monitor to copy its database.

Note: Refer to the APM Operations Manual for more detailed instructions on adding a database.

The Attendant Monitor component must be initialized from the APM. Follow the steps below to initialize the AttendantMonitor component:

-On the APM System Operations Menu, select the Non-CRT Application Control option.

-Use the Initialize command to start up the “AttendantMonitor” component.

This completes the Atendant Monitor application installation and

configuration...

Page 14 NDA-30135 Revision 1