NEC NDA-30135 manual User-Defined, OAI1TCP

INSTALLATION & CONFIGURATION Attendant Monitor Operations Manual

OAI-Conf Settings Use the OAI-Confcommand on the APM Configuration Entry screen to make the necessary parameter entries. For parameters shown with an asterisk (*) in the table below, make entries exactly as shown. The other parameters are shown with sample entries that may be changed to meet site requirements. Use the instructions provided for this option in the APM Operations Manual:

Parameter	Entry Value	Description
Database Name #1*	/oai/db/cur/tenants	The path name of the tenant number
		database.
Database Name #2*	/oai/db/cur/Attmon	The path name of the Attendant Monitor
		database.
Timeout Value #1	0	Unused
Timeout Value #2	0	Unused
Tenant Number	1	Default Tenant Number
Source Link Name	OAI1TCP	Port on the source side of the
		communication link. Entry should match a
		link name in the APM system
		configuration file.
Destination Link Name	PBX1TCP	Port on the destination side of the
		communication link. Entry should match a
		link name in the APM system
		configuration file.
Association Recovery	30	Number of seconds Attendant Monitor
		waits before trying to reestablish an
		association with the NEAX that has been
		released.

User-Defined	No user defined parameters are used in Attendant Monitor. Therefore, all user
Parameters	defined parameters are blank.

Continue to the next page for Database Support...

Page 10 NDA-30135 Revision 1