NEC NDA-30135 manual Installation & Configuration, Installation Procedure

Attendant Monitor Operations Manual INSTALLATION & CONFIGURATION

Chapter 2 INSTALLATION & CONFIGURATION

This chapter provides a step-by-step description of the installation, initial configuration, and Main Menu functions for Attendant Monitor. Before proceeding with the configuration, ensure that the SCO UNIX operating system and the Applications Manager (APM) platform software are installed on the system.

The Applications Manager Operations Manual provides detailed instructions for using the APM menus and for completing the data entry screens illustrated in this manual. NEAX2400 IMS system manuals provide the procedures for making the data assignments at the NEAX MAT.

Installation Procedure

This section describes the procedures to install the Attendant Monitor application software. Follow the procedure below to install the software.

Note: Some keyboards use a marked Return key for the carriage return function. Other keyboards mark this function key as Enter. The installation procedure will iden- tify this function as Return (Enter). When the procedure indicates, use the appro- priate marked key on your particular keyboard.

login: apmadm

password:

To begin the Attendant Monitor software installation, type apmadm at the UNIX login prompt and press Enter.

(If your “apmadm” account requires a password, enter the “apmadm” password at the subsequent password prompt.)

Continue with the installation on the following pages...

NDA-30135 Revision 1 Page 3