3) Rotate the lens barrel clockwise to fix the lens unit.

Lens barrel

3.Secure the fixed screws and connect the extension cable attached to the projector.

1)Secure the three screws on the lens holder.

2)Insert the connector of the lens unit into the socket of the ex- tension cable attached to the projector.

4.Reattach the lens hood.

1)Insert the lower lens hood into the hook.

Hook

2)Insert the upper lens hood while pushing the left and right bottom. Secure the two screws.

NOTE: This completes installation for the optional lens TL-08SF and TL-1Z. For TL-2Z and TL-4Z, attach the supplied dust cap as shown on the next step.

5. Attach the dust cap.

E – 15