INTRODUCTION

This section introduces you to your new MultiSync XT5000 Projec- tor, provides a list of materials that comes with your projector and describes the features and controls.

Congratulations On Your Purchase Of The MultiSync XT5000 Projector

The MultiSync XT5000 is one of the finest, most technically advanced projectors available today. The XT5000 enables you to project exceptionally bright, precise images up to 500 inches across (measured di- agonally) from your PC or Macintosh computer (desktop or notebook), VCR, document camera, laser disc player, DVD player and even an HD VCR or HD laser disc player.

You can use the projector on a tabletop or cart, you can permanently mount it on a ceiling*, or you can use the projector to project images from behind the screen. The remote control can be used in a wired or wireless configuration.

Features you'll enjoy :

•A high-performance 1.0 KW Xenon lamp that delivers 4500 ANSI lumens (High Bright mode) and 4000 ANSI lumens (Normal mode) and lamp life is 1500 hours.

•NEC’s unique DLPTM based light engine offers true color reproduc- tion.

•XT5000 can accommodate any picture size from 80 to 500 inches (measured diagonally).

•The XT5000 projects images with uniform brightness while colors remain true to their original source.

•The projector can be double or even triple stacked without an exter- nal frame, producing bright images of 9,000 or 13,500 ANSI lu- mens in addition, double or triple stacking offers built-in redun- dancy.

•An image can be projected from in front or behind a screen, and the projector can even be installed on the ceiling*.

•Supports RGB digital, HDTV and DVD signals as well as most IBM VGA, S-VGA, XGA, SXGA(scaling), Macintosh or any other RGB signals within a horizontal frequency range or 15 to 83.5 kHz and a vertical frequency range of 50 to 85 Hz. This includes NTSC3.58, PAL, PAL60, SECAM, NTSC4.43, Y/C and 1080I, 720P and 480P HDTV standard video signals.

•Built-in telecine detection enables 3:2 pull-down correction with no external processing necessary, eliminating jitter and artifacts to allow for original film source motion quality.

•A newly designed menu system provides for easy setup and opera- tion of the projector.

•The remote control can be used wired or wireless.

*Installing the projector on the ceiling must be done by authorized NEC technicians.

Consult your NEC dealer for more information.

Digital Light Proccessing and DLP are trademarks of Texas Instru- ments.

Getting Started

The fastest way to get started is to take your time and do everything right the first time. Taking a few minutes now to review the manual may save you hours later on. At the beginning of each section of the manual you'll find an overview. If the section doesn't apply, you can skip it.

What's In The Box?

Make sure your box contains everything listed. If any pieces are miss- ing, contact your dealer. Please save the original box and packing materials if you ever need to ship the projector.

•NEC MultiSync XT5000 Projector

•Remote Control with Remote Cable (wireless/wired).

•DFP Cable

•Power Cable

•Power Cable Stopper

•Two AAA Batteries

•User Manual

E – 7