Turns on the Advanced AccuBlend feature. The projec- tor automatically reduces or enlarges the current image to fit the full screen.
Turns off the Advanced AccuBlend feature. The projec- tor displays the current image in its true resolution.

Adjustments

Image

The Adjustments Menu provides access to controls for your image. Use the ▲/▼ buttons on your remote control or the projector cabinet to highlight the menu for the item you want to adjust.

Picture

Brightness:

Adjusts the brightness level or the back raster inten-

 

sity.

Contrast:

Adjusts the intensity of the image according to the

 

incoming signal.

Color:

Increases or decreases the color saturation level (not

 

available for RGB).

Hue:

Varies the color level from +/- green to +/-blue. The

 

red level is used as reference. This adjustment is only

 

valid for Video and Component inputs (Not available

 

RGB).

Sharpness:

Controls the detail of the image for Video (Not avail-

 

able for RGB and Component).

V-Aperture:

Adjusts edge enhancement in the vertical direction.

 

(Not available for RGB)

Blanking

This feature allows you to mask any unwanted area of the screen im- age.

Auto Adjust:

When “Auto Adjust” is set to “On”, the projector automatically determines the best resolution for the current RGB input signal to project an image using NEC’s Advanced AccuBlend Intelligent Pixel Blending Technology. The image can be automatically adjusted for geometry and stability; “Horizontal Position”, “Vertical Position” and “Pixel Adjust.”

On:

Automatically adjusts image “Horizontal Position”, “Ver-

 

tical Position” and “Pixel Adjust.”

Off:

User can adjust the image display functions (“Horizon-

 

tal Position”, “Vertical Position” and “Pixel Adjust”)

 

manually.

Horizontal/Vertical Position (when Auto Adjust is off):

Adjusts the image location from left to right.

This adjustment is made automatically when the Auto Adjust is turned on.

Pixel Adjust (when Auto Adjust is off):

Displays the Clock and Phase adjustments.

Clock: Use this item with the “Auto Adjust off” to fine tune the computer image or to remove any vertical banding that might appear.

Phase: Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.) Use the

and  buttons to adjust the image.

Use “Phase” only after the “Clock” is complete.

Resolution (when Auto Adjust is off):

This allows you to activate or deactivate the Advanced AccuBlend feature.

Auto:

Native:

NOTE: While you are displaying an image with higher resolution than the projector’s native resolution, even when you are in the Native mode, the image is displayed full screen using the Advanced AccuBlend feature.

Native with Zoom: Enlarges the image to fill the screen in the Native mode.

NOTE: Unless the projector is used at 0 degree of lens vertical offset, you cannot get a correct display position.

E – 34