NEC XT5000 When Used with Two or More Switchers (100 Inputs), OPTION (PC), CONTROL, OPTION, (PC)

When Used with Two or More Switchers (100 Inputs)

Up to 100 inputs can be accepted using the NEC ISS-6020 Switcher.

How to make connections:

1Connect the REMOTE 1 terminal of the master Switcher to the REMOTE 1 of the projector using the optional control cable (15p- 15p/CTL-6010).

2Next connect the REMOTE 2 terminal of the master Switcher to the REMOTE 1 terminal of the first slave Switcher using the same optional control cable as mentioned above. Third, connect the REMOTE 2 terminal of the first slave to the REMOTE 1 of the second slave, and the REMOTE 2 terminal of the second slave to the REMOTE 1 terminal of the third slave (— and the REMOTE 2 of the ninth slave to the REMOTE 1 of the tenth slave). Connect all the Switchers with optional control cables.

• Select [Main Menu] → [Projector Options] → [Switcher Control]

→ [SW2 Level]. See page E-40 for the information in detail.

•Refer to the user’s manual accompanying the Switcher.

•Cables mentioned are not included with the projector.

NOTE:

•Be sure to set all the slide switches (S8603) of the Switcher to RS-422 positions. Set the one on the last slave Switcher to the appropriate position to match the connected equipment such as a personal computer. (RS-422/RS-232C for PC control of pro- jector)

•Set the DIP switch S8601 of the Switcher.

Signal	Switcher		Signal
			REMOTE 1
10 inputs		SLAVE 1
			REMOTE 2
			Signal
			REMOTE 1
10 inputs		SLAVE 2
			REMOTE 2
			REMOTE 1
		SLAVE 3
			REMOTE 2
		SLAVE 9	Signal
			REMOTE 1
10 inputs		SLAVE 10
			REMOTE 2

			OPTION (PC)
			REMOTE
To SLOT 1			CONTROL
To SLOT 2	MASTER			Signal (Input 1)
To SLOT 10	SWITCHER
					REMOTE
To REMOTE 2		REMOTE 1				Projector

OPTION

(PC)

NOTE: The optional remote control RC-6320 for ISS-6020 will not work correctly in the SW Level 1 or 2 mode.

E – 24