Factory DefaultVD Delay (Expert mode only):

 

 

 

This feature is used to correct vertical jitter of non-standard inter-

 

 

 

laced signal. Select one of the three VD delay levels.

Returns all adjustments and settings to the factory preset level.

Clamp Timing (Expert mode only):

All Data:

Resets all adjustments and settings for all the

 

 

 

signals to the factory preset.

 

 

Including Entry List: Also deletes all the signals in the Entry List

 

 

 

and returns to the factory preset.

 

 

Current Signal:

Resets the adjustments for the current signal

This function sets the standard black level position of the displayed

 

to the factory preset levels.

image. Select one of the following three options.

 

 

 

Auto:

Normal setting.

NOTE: The items that can be reset are all the items in the Adjust-

 

 

Tri-Sync:

Setting for HDTV signal

ments and Image Options except for Keystone and Lamp Output.

 

 

Front Porch:

For other settings than above

 

 

 

 

 

 

Image Options

Video Mode

Provides optional controls such as gamma correction, component signal selection, wide screen and video noise reduction features.

Image Mode

Aspect Ratio: This feature allows you to display the incoming video signal in the correct proportion.

Normal: Displays normal video picture with a 4-to-3 aspect ratio as is.

Zoom: Displays DVD’s video picture with a 16-to-9 aspect ratio expanded in the horizontal and vertical direction, maintaining the original proportion.

Wide Zoom: Displays DVD’s squeezed video picture with a 16-to-9 aspect ratio expanded in the horizontal direc- tion, converted to 4-to-3 aspect ratio.

Cinema: Displays DVD’s squeeze video picture with a 16-to-9 aspect ratio compressed in the vertical direction, maintaining the 16-to-9 aspect ratio.

Anamorphic: Select this mode for use of anamorphic lens. This mode will change the aspect ratio according to the lens.

Gamma

This option corrects gamma. Select the appropriate item.

NTSC :Setting for NTSC signals

Graphics : Setting for Computer Graphics

Graphics/NTSC : Setting for both Computer Graphics and NTSC signals

PAL/SECAM 2.8 : Setting for PAL and SECAM signals at the gamma value of 2.8

PAL/SECAM : Setting for PAL and SECAM signals

Natural 1 : Setting for Video and S-Video signal

Natural 2 : Setting for component signal

E – 36