Menu Descriptions & Functions

Source Select

Enables you to select a video source such as a VCR, DVD player, laser disc player, computer or document camera depending on what is connected to your inputs.

Press the up/down buttons on your remote control or the projector cabinet to highlight the menu for the item you want to adjust.

*RGB1,2,3

*Component (YCbCr)

*Video 1, 2

*S-Video 1, 2

*RGB Digital

*SDI

*Entry List—Displays the list of the entry signals. Use the ▲/▼ but- tons on your remote control or the projector cabinet to select the signal and press the ENTER button on the remote control or the projector cabinet to project the image of the selected source.

Entry Edit Command (Expert mode only)

You can edit the signal on the entry list.

To do so:

1)While pressing and holding CTL, press ENTER on the remote con- trol to display the Entry Edit Command window.

*Cut Enables you to remove a selected signal from the list and place it on the “clipboard” in the projector.

*Copy Enables you to copy a selected signal from the list and place it on the “clipboard” in the projector.

*Paste Enables you to paste the signal placed on the “clip-board” to any other line of the list. To do this, select “Paste” and then select the line number you want to paste to. Last press ENTER.

*Edit Enables you to change source name or assign the direct key.

*The following buttons are not available for the currently projecting signals:

1)The Cut and Paste buttons on the Entry Edit Command screen

2)The Input Terminal button on the Entry Edit screen

When complete, select OK and press ENTER. To exit without storing setting, select Cancel.

Select “Source Name” and press ENTER to display the Source Name Edit window. You can change source name on this window.

Select "Input Terminal" and press ENTER to display the Input Terminal window. You can change input terminal on this window.

Select “Direct Key” and press ENTER to display the Direct Key win- dow. You can assign specific remote keys for direct signal input selec- tion.

NOTE: Existing direct key settings are overwritten with new set- tings.

Select “List” and press ENTER to display the direct Key assignment list.

Select “OK” and press ENTER to close the window.

To close the List window, press CANCEL on the remote.

E – 33