iTap GigaBit Copper Port Aggregator
Chapter 4
Using Web Manager
Overview
This chapter describes how to monitor and control individual iTap GigaBit Port Aggregators using Web Manager. The following topics are covered:
•Accessing Web Manager
•Status
•Statistics
•Configuration
The iTap GigaBit Port Aggregator has
Note:____________________________________________________________________
To access Web Manager, the Display option in the CLI must be set to ON. For more information, see Using the Command Line Interface on page 9.
__________________________________________________________________________
Accessing Web Manager
Web Manager is a
To access Web Manager:
1.Open an Internet browser on your computer.
2.Enter the iTap’s IP address in the URL box and press Enter. The default IP address is 10.60.0.123. The Web Manager page appears as shown in Figure 15.
21