iTap GigaBit Copper Port Aggregator
Configuring the iTap
Web Manager has both read-only and read/write fields. Use the read/write fields in the iTap Configuration section of the Web Manager page to set configuration parameters (see Figure 18).
Figure 18: iTap Configuration
The following table explains each available option. To make your changes take effect, click Submit Changes at the bottom of the page.
Field Name | Function/Value | Description |
|
|
|
IP Address | 0.0.0.0 | IP address of the iTap. The default |
|
| IP address is 10.60.0.123. You can |
|
| change the IP address by typing a |
|
| new IP address in the text box. |
|
|
|
Net Mask | 0.0.0.0 | Displays current Net Mask of the |
|
| iTap. The default Net Mask is |
|
| 255.255.0.0. You can change the IP |
|
| address by typing a new Net Mask in |
|
| the text box. |
|
|
|
Manager IP | 0.0.0.0 | IP Address of the computer running |
Address |
| Net Optics System Manager over a |
|
| WAN. You can change the IP address |
|
| by typing a new IP address in the |
|
| text box. |
|
|
|
Gateway IP | 0.0.0.0 | Displays current IP Address of the |
Address |
| current WAN Gateway. You can |
|
| change the Gateway by typing a new |
|
| IP address in the text box. |
|
|
|
25
