iTap GigaBit Dual Port Aggregator
Connecting to the Monitoring Devices
The iTap comes with two monitor cables ready for iTap installation.
To connect the iTap to your monitoring device:
1.Connect Monitor Port 1 to the appropriate monitor using the cables supplied with your iTap.
2.Connect Monitor Port 2 to the appropriate monitor using the cables supplied with your iTap.
® |
|
|
|
|
| TM Dual Port Aggregator |
|
| Network |
| GigaBit Fiber | ||
LINK |
| A | 1 | |||
A |
|
| B | 2 | ||
B A | 2 |
|
|
|
| |
1 | B | 1 |
|
|
|
|
2 |
| RESET |
|
|
|
|
www.netoptics.com |
| OUT | IN | OUT IN | OUT Monitor | OUT |
To Monitoring Device NIC (Rx)
To Monitoring Device NIC (Rx)
Figure 12: 96542iTP Monitor Connections
16
