iTap GigaBit Dual Port Aggregator
Connecting the Management Port
To use the remote interfaces you must connect the Management Port to the network.
To connect the iTap Management Port:
1.Connect a CAT5 cable to the Manangement Port as shown in Figure 9.
2.Connect the other end to a network switch or hub.
Management | RS232 | |||||
|
| Port |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To network switch or hub
Figure 9: Connecting the Management Port
Connecting to the Network
The iTap comes with two network cables ready for iTap installation.
To connect the iTap to your network:
1.Connect Network Port A to the appropriate network device using the cables supplied with your iTap.
2.Connect Network Port B to the appropriate network device using the cables supplied with your iTap.
3.Verify that the iTap Network Ports are cabled
14
