iTap GigaBit Dual Port Aggregator
Chapter 3 Using the Front Panel Interface
Overview
This chapter describes how to interpret and work with the front panel features of the iTap GigaBit Dual Port Aggregator. The following topics are covered:
•Display
•LED indicators
•Reset Button
The iTap front panel provides information in two ways. The displays shows utiliza- tion and peak information and the LEDs show link status and alarm conditions. The front panel also has a recessed reset button to clear the peak data.
Display
The front panel of the iTap provides network traffic information on a 2x16 character LCD. After a bootup message, the display scrolls through the following messages, advancing every five seconds:
Display Message | Description |
|
|
% Util A = XX% | Percent of Network Port A bandwidth being used by |
| incoming traffic |
|
|
% Util B = XX% | Percent of Network Port B bandwidth being used by |
| incoming traffic |
|
|
Peak A = XX% | Incoming traffic peak on Network Port A as percent of |
| bandwidth |
|
|
Peak B = XX% | Incoming traffic peak on Network Port B as percent of |
| bandwidth |
|
|
Time A = AAA, hh: | The day and time of the highest peak on Network Port A |
mm:ss | since last reset where AAA is the day of the week and hh: |
| mm:ss is hours, minutes, and seconds on a |
|
|
Time B = AAA, hh: | The day and time of the highest peak on Network Port B |
mm:ss | since last reset where AAA is the day of the week and hh: |
| mm:ss is hours, minutes, and seconds on a |
|
|
19
