Net Optics 96542iTP, 96547iTP manual Creating a Group, Using the Toolbar, To create an iTap group

iTap GigaBit Dual Port Aggregator

Tip! _____________________________________________________________________

To use pop-up menu shortcuts, click your right mouse button in the System Frame.

__________________________________________________________________________

Using the Toolbar

Figure 26 shows the System Manager toolbar.

Figure 26: Toolbar

The table below describes the icons found on the toolbar.

Tool	Description
New iTap	Add iTaps to a group
New Group	Create an iTap group
Delete	Delete iTap from the system
Modify	Change the iTap name, IP address, model, and add notes
Refresh	Refresh the data display
Exit	Close Net Optics System Manager
About	View information about System Manager

Creating a Group

You can organize iTap devices into groups for quick access. You must create a Group before you can add iTaps to your system.

To create an iTap group:

1.Click New Group in the toolbar as shown in Figure 27. A new group bar appears in the System Frame as shown in Figure 28.

Figure 27: New Group

32