Panasonic KX-TG5761, KX-TG5766, KX-TG5767 operating instructions Setting up the base unit

Preparation

Setting up the base unit

Connecting the AC adaptor and telephone line cord

Connect the telephone line cord until it clicks into the base unit (A) and telephone line jack (B). Connect the AC adaptor cord by pressing the plug firmly (C).

LUse only the included Panasonic AC adaptor PQLV207.

C

Hook

A

To single-line B telephone jack

(RJ11C)

(120 V AC,

60 Hz)

Note:

LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

LThe unit will not work during a power failure. We recommend connecting a corded telephone to the same telephone

line or to the same telephone jack using a Panasonic T-adaptor (page 10).

If you subscribe to a DSL service

Please attach a noise filter (contact your DSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:

–Noise is heard during conversations.

–Caller ID features (page 36) do not function properly.

	To single-line
Noise filter	telephone
	jack (RJ11C)

14For assistance, please visit http://www.panasonic.com/phonehelp